keywords: Pellet machine Coal Briquetting Machine

中文站

+86 18539990967

栏目banner3

Dust Collector

      • Power】: 

        22-25(kw)
        【Particle size】: ≥10μm<5μm

      • Application range】: Widely used in metallurgy, mining, cement, thermal power plants, building materials, casting, chemicals, pharmaceuticals, tobacco, asphalt mixer, grain, machining, boiler dust.

Advantages

  Using the upper part of the pumping mode, when changing bags, the filter bag skeleton is drawn from the net gas chamber of the precipitator, the dirty bag is put into the ash bucket, and taken out by the ash bucket, thereby improving the bag changing environment.

 The use of straight-through low-pressure pulse valve, cleaning effect is good, long cleaning cycle, reducing the back-blowing gas energy consumption.

The dust remover adopts the method of separating and cleaning off-line by the counter-pulse of the sub-room, which avoids the phenomenon that the dust is repeatedly adsorbed, improves the effect of pulse-blowing cleaning and reduces the resistance of the cloth bag.

The use of pressure or timing two control methods, high reliability, long life, easy for users to operate and use.


Dust Collector

Dust removal device classification:

1. Electrostatic precipitator

    At present, the common domestic electrostatic precipitator equipment types can be roughly divided into the following categories: according to the direction of the air is divided into vertical and horizontal, according to the precipitation type is divided into plate and tube type, according to the sedimentation plate dust removal method points Dry-type wet, parachute-type electrostatic precipitator and high-voltage electrostatic precipitator and other machines.

    Uses: Separation of industrial dust particles in the exhaust gas and fine dust, widely used in metallurgy, mining, cement, thermal power plants, building materials, casting, chemical, tobacco, asphalt mixer, food, machining, boiler dust, cement raw materials, cooked Mill, cupola and so on.

2. Bag filter

     Bag filter type are mostly in accordance with the cleaning method to name, mainly divided into mechanical vibration type bag filter, atmospheric backflush bag filter and pulse jet bag filter three, the sub-micron particles The fine dust diameter has a higher classification dust removal efficiency of the gas treatment range.

     Uses: Separation of industrial dust particles in the exhaust gas and fine dust, widely used in metallurgy, mining, cement, thermal power plants, building materials, casting, chemical, tobacco, asphalt mixer, food, machining, boiler dust.

3. Cyclone dust collector

    Cyclone dust removal equipment is the use of gas to accelerate the rotation and produce centrifugal force, the rotating solid dust separated from the gas out of the principle of dust removal equipment.

    Usage: Suitable for all kinds of industrial boilers, machining, metallurgical building materials, foundry, mining, cement, mining rough dust, intermediate purification.

4. Wet dust collector

    Wet dust collector type, from different angles have different categories: According to the structure of the type can be divided into storage wet dust, pressurized water spray and forced rotation spray wet desulfurization precipitator; according to the size of energy consumption can be divided For low energy consumption and high energy consumption; According to the gas-liquid contact can be divided into the whole and scattered contact wet filter and so on.

     Uses: Suitable for metallurgy, coal, chemicals, foundry, power generation, building materials and refractories industries.

5. Desulfurization precipitator

Working Principle

  The dust collector is mainly composed of a hopper, a filter chamber, a net air chamber, a bracket, a poppet valve, and a blow-ash cleaning device. Work, the dusty gas from the air duct into the ash bucket. Large particles of dust fall directly into the bottom of the hopper, the smaller the dust turning up with the airflow into the filter chamber, and was retained in the outer surface of the filter bag, the purified flue gas into the bag, and through the bag mouth and net room Into the wind down, discharged by the exhaust outlet.
  As the filtration continues, the dust on the outer surface of the filter bag continues to increase and the resistance of the equipment increases. When the equipment resistance rises to a certain value, cleaning operation should be carried out to clear the dust accumulation on the surface of the filter bag.

dust remover

Technical Data

Related Products

Customer Case

Order Online

You can leave us your equipment demands and contact informaton in following table. We will get in touch with you asap. In order to get contact with your in time, please fill in your complete information. Thanks(Tips:You must fill in the items with *. )

Your Email:
Name:
Address:
Message:

Related News

Contact Us

  • Tel:+8618539990967
  • Wechat/whatsapp:+86 18539990967
  • Fax: 86-371-86565119
  • Email:service@tdaxy.com
  • Factory Address:China -No. 198, Longding Industrial Park, Lotus Street, High-tech Zone, Zhengzhou

Scan Website Code

Copyrights:Zhengzhou Taida Mining and Metallurgy Equipment Co., Ltd | 网站地图